Can Am Spyder 4.5 inch Riser Kit SPY-ERISER Our new 4.5 inch (114mm) riser will fit all 2008 - 2010 Manual or Electric RS Models. Fully adjustable forward or back for a more comfortable and enjoyable ride on your Spyder. These kits are made from die cast aluminum and contain all hardware for years of trouble free service. Kits comes in 4.5 inch height and allows for use of the existing stock cable, hoses, and wiring without any modifications. The 4.5 inch kit is only for Spyders who DO NOT have the 1 inch BRP factory riser kits.

Can Am Spyder Adjustable Handlebar Risers Can Am Spyder Adjustable Risers Adjustable Risers for the Can-Am Spyder RS. These risers are adjustable in height from 2 inches to 5 inches. They also allow you to adjust the angle of your grips to any angle you like. Accommodates riders from under 5' tall to over 6' tall. Free Shipping. Click on picture to inlarge. Click here for Instructions Click here for Free Shipping Details

Can Am Spyder Handlebar Risers Billet Bolt Caps. A ESI Motorcycle Product.

Can Am Spyder Cruise Assist. A simple, effective cruise control for your bike!! Features/Benefits Maintains throttle position while allowing you to relax your hand, wrist and forearms. Greatly reduces rider fatigue and strain on hand and wrist ‘Stealth’ design, blends in Very simple to install. Takes less than 15 minutes to fit stock grips, a bit longer for aftermarket grips Very simple to operate, even with heavy winter gloves High quality, compact and durable design, super smooth action Operation The friction nut has a left-hand thread. It must be adjusted so that it makes light contact with the rubber throttle sleeve. To Engage: While rolling on the throttle, the friction nut can be gripped between the small finger and palm of hand. This action tightens the nut and provides sufficient friction to set throttle to the desired opening. (The friction is such that the rider may still open and close the throttle. It simply has a slight stiffness to it.) To Disengage: While rolling off the throttle, grip friction nut between small finger and palm of hand. The throttle should open and snap closed freely when correctly disengaged. Note: Does not work with Kuryakyn ISO Grips Fits: 2008-2009 SE5 & SM5, 2010 RS

Can Am Spyder Hand Brake System. Handbrake system is a complete bolt on unit requiring no modifications to the Spyder for installation There are no modifications to the existing Spyder braking system This is a hydraulic system that utilizes a master cylinder and a custom slave cylinder to actuate the existing brake system Two kits are available. One for stock OEM handlebars and one for those who have after market handle bars. Please specify which you need when ordering. Free Shipping. Click here for Instructions

Can Am Spyder Handlebar Riser Kits. Fits: 2008-2009 SE5 & SM5, 2010 RS Free Shipping. These kits install quickly to finally allow for a more comfortable and enjoyable ride on your Spyder. This kit allows you to still retain the stock upper console containing the Limited Edition badges. The 4 inch kit is only for Spyders who DO NOT have the 1 inch BRP factory riser kits. If you can't install or don't feel confident about installing our lighting products yourself, we suggest taking them to a qualified professional motorcycle mechanic for installation. A ESI Motorcycle Product. The 3 inch kit is designed to be used when you already have the BRP 1 inch factory riser kit installed, or if you don’t want as much rise in your bars. You can also add the billet bolt caps to your risers for the upper bar bolts, and give your riser kit a matching custom look. 3” and 4” risers are for the SM5 Spyder (Manual Shift) 4” risers are available for the SE5 Spyder (Electronic Shift) We assume no responsibility for customer installed products. Installation instructions are general procedure recommendations only. Click here for Instructions Click here for Free Shipping Details

Can Am Spyder RT GPS/Gizmo Mount Bracket. Mount bracket kit to mount your Garmin 550 GPS to your Can-Am Spyder RT handle bars. This bracket is also a universal gizmo mount. Any belt clip style cell phone holder or ipod holder can easily be attached to this bracket. Click here for Instructions

Can Am Spyder RT Helmet Locks. Kewlock grip tip helmet lock pair. These bolt straight on to your Can-Am Spyder RT handle bars in place of the stock end caps. Provides a super convenient place to lock up your helmets while you go inside for lunch! Installs in minutes. Comes with two locks with 4 matching keys, both locks are keyed the same. Fits The RT Spyder. Click here for Instructions